Panasonic LB-DH7 Series Operator's Manual page 72

Others
Item
± Software problems
Updating
After updating
Troubleshooting guide
Problem
Don't know how to obtain an
update file.
Cannot update (error message)
"W2120" is displayed.
"W2040" is displayed.
"Now can't update software." is
displayed.
Cannot update in the "Eject
Medium Mode" screen.
(Warning code: W2150)
Cannot update from the Web
interface.
Does not start up after the software
update.
72
Cause/Solutions
)Consult the vendor.
The application prohibits the ejection of
the media from the drive system.
)Permit ejection from the application
and try again.
Magazine drawer is open.
)Close the magazine drawer and try
again.
)Before starting an update, stop
controlling the unit through the
application and the Web interface.
)Ensure that all of the magazine
drawers are closed. Close them first,
and then start an update.
The application sets the magazine eject
mode.
)Obtain the update file again.
)When upload has failed on the Web
browser, see "Web interface" (
)Press the power button for at least
15 seconds to force the unit to turn off,
and turn on the unit again.
If the problem persists, please contact
your support service provider. (
.
73)
83)