Operations; Operation Method - Panasonic LB-DH7 Series Operator's Manual

Operations

Operation method

Set the following items as required.
Operations for setting and maintaining the unit
Operates the Web interface to set and maintain the unit. (
Access the unit with the Web browser to check the state of the unit, make various RAID settings, make various
settings for opening and closing the magazine drawer, and operate the magazine drawer.
Note
When settings of the unit have been changed, it is recommended that the settings be saved through the Web
interface. ( 42)
Operations by an application
The unit executes instructions sent from DA control software, which supports the SCSI commands below. DA control
software must be installed to a server connected to the unit.
` Drive system control: MMC command
` Changer unit control: SMC command
Install the application to either the server on which DA control software is installed or another server, and connect
the application using any of the iSCSI, SAS or FC interface.
The DATA ARCHIVER Manager software (optional) and storage control application are used to control the changer
unit and read it from the magazine or write data onto a magazine.
For information on how to use, refer to each application manual.
25)
24