System Report - Siemens Synco OZW772 Series Commissioning Instructions

Notes
Note
Siemens
Building Technologies
· Check
to select active entries.
· Select "Annually"
· Click [ Check ] to sort and check the data before saving.
2.5.3.5

System report

Path: Home > 0.2.150 OZW772.xx > Settings > System report
Enter these settings if the Web Server is to regularly send an e-mail for a fault.
Data point
Signal time
Default val: 06:00 hh:mm
Setting val: 00:00...23:59
Message cycle
Default val: 1 d (day)
Setting val: 0...255 d
Priority
Default val: Urgent
Setting val: Urgent /
Not urgent
Next report
Default val: 0 d (day)
Setting val: 0...255 d
Web server OZW772... V6.0
Commissioning
to set repetitive switching points.
Explanation, example
The setting value corresponds to the time of
day when a system report is sent (once every
24 hours).
The setting value corresponds to the interval
(in days) at which a system report is sent.
The first system report is delivered after
completion of the first message cycle and then
as per the message cycle.
The system report is disabled when the
message cycle = 0.
Filter for sending the system report.
Under the setting urgent, the system report is
sent to all message receivers. Under the
setting not urgent, the message receives are
excluded who have only subscribed to "Urgent
only" messages.
Waiting period until the next system report is
sent.
—
—
—
—
31 / 176
CE1C5701en
2015-10-12