Supply State; Software Updates - Siemens Synco OZW772 Series Commissioning Instructions

Restore default state
Note
Note
System data update
Note
Firmware update
Logo update
Siemens
Building Technologies
2.10

Supply state

The Web Server can be reset to factory default settings. This is probably a good
idea when using the Web Server for another plant.
Procedure:
1. Simultaneously press "Long" (> 6 seconds) on the "Remote"
and "Prog"
The LED "On" turns off. The Web Server restarts.
2. Wait until the Web Server is operational (LED "Run"
When restoring default state:
· All settings are reset to default state.
· Plant diagrams are deleted.
· The device list is deleted.
· Uploaded files are deleted.
· Unsent messages are deleted.
· History data is not deleted:
It must be deleted manually (see Section 2.8).
The KNX device addresses and Ethernet IP address are also reset to default state.
2.11

Software updates

We differentiate between the following:
· System definition updates to integrate device descriptions of new devices in the
Web Server.
· Firmware updates to update the Web Server to the latest firmware version.
Firmware updates may also contain new device descriptions (system
definitions).
The Web Server supports a number of Synco devices and differentiates them via
device descriptions. A text catalog with various languages contains all Web Server
texts and device descriptions.
A system definition update is a simply operational step via web browser.
See Section 4.4 for information on uploading system definitions.
The current, installed version of system definitions is displayed in device info.
Local operation on Web Server required to update firmware. Procedures are
communicated for any firmware update accordingly.
The logos can be customized.
Web server OZW772... V6.0
Commissioning
button
is green).
43 / 176
CE1C5701en
2015-10-12