Setup Of Optional Pci Card - NEC Express5800 Series Maintenance Manual

Chapter 2 Configuring and Upgrading the System
5.7.5

Setup of Optional PCI Card

(1)
N8804-011 10GBASE -T 1ch board set or N8804-012 1000BASE-T 2ch board set

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8804-011 10GBASE-T 1ch board set or N8804-012 1000BASE-T 2ch board set, and restart the
system.
After starting the system, the driver will be installed automatically.

Configure duplex LAN
See Chapter 2 (2. Network Duplexing).
(2)
N8803-040 Fibre Channel 1ch Board Set

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8803-040 Fibre Channel 1ch board and start the system.
After starting the system, the driver will be installed automatically.
To enable the fault-tolerant feature of the optional device, the identical PCI cards
Important
must be installed to the slots with the same number in CPU/IO module 0 and CPU/IO
module 1.
For the supported optional devices, contact your sales agent.
Important To use this board, use a LAN cable having RJ-45 connector which is compliant with
IEC8877 standard. If any other connector is used, it may not be removed easily.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
147