NEC Express5800 Series Maintenance Manual page 171

Chapter 3 Useful Features
Option
Gateway
Get target info via DHCP
Target Name
Target IP Address
Target Port
Boot LUN
Authentication Type
CHAP Type
CHAP Name
CHAP Secret
CHAP Status
Reverse CHAP Name
Reverse CHAP Secret
Reverse CHAP Status
Save Changes
Back to Previous Page
Parameter
IP Address
[Disabled]
Enabled
4 to 223 alphanumeric
characters
IP Address
0-65535
Up to 20 alphanumeric
characters
CHAP
[None]
One way
[Mutual]
Up to 126 alphanumeric
characters
12 to 16 alphanumeric
characters
(Display only)
Up to 126 alphanumeric
characters
12 to 16 alphanumeric
characters
(Display only)
–
–
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Descriptions
Set the gateway. This option does not appear if Enable
DHCP was enabled.
Enable or disable acquiring the target information via the
DHCP. This option does not appear if Enable DHCP was
disabled.
Set the target name. Set in the format of "iSCSI qualified
name (IQN)". This option does not appear if Get Target
info via DHCP was enabled.
Set the target IP address. This option does not appear if
Get Target info via DHCP was enabled.
Set the target port. This option does not appear if Get
Target info via DHCP was enabled.
Set LUN. This option does not appear if Get Target info
via DHCP was enabled.
Set the authentication type.
Set the CHAP type. This option appears if Authentication
Type was set to [CHAP].
Set the CHAP name. This option appears if
Authentication Type was set to [CHAP].
Set the CHAP secret. This option appears if
Authentication Type was set to [CHAP].
The CHAP secret setting is displayed. This option
appears if Authentication Type was set to [CHAP].
Set the reverse CHAP name. This option appears if
Authentication Type was set to [CHAP] and CHAP Type
was set to [Mutual].
Set the reverse CHAP secret. This option appears if
Authentication Type was set to [CHAP] and CHAP Type
was set to [Mutual].
The reverse CHAP secret setting is displayed. This
option appears if Authentication Type was set to [CHAP]
and CHAP Type was set to [Mutual].
Save the changes.
Return to the iSCSI Configuration submenu.
1. System BIOS
[ ]: Factory settings
171