NEC Express5800 Series Maintenance Manual page 191

Chapter 3 Useful Features
Item
IPv6 Property
IPv6
Address Assignment
Mode
Link Local Address
Global Address
Static Address
Prefix Length
Gateway Address
Access Limitation
Limitation Type
IP Address
Service
HTTP
HTTP Port Number
HTTPS
HTTPS Port Number
SSH
SSH Port Number
*1: If an illegal value is specified for subnet mask, an error message is displayed and setting is disabled.
*2: Can be changed only when DHCP is set to "Disable".
*3: Can be changed only when DHCP is set to "Enable".
*4: Host Name should be within 63 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*5: Host Name and Domain Name should be within total of 255 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*6: Can be specified only when IPv6 is set to "Enable".
*7: Displayed only when "Dynamic" is specified for Address Assignment Mode.
*8: Can be specified when Access Limitation Type is "Allowed Address" or "Deny Address". The length must not
exceed 255 characters.
*9: The range of IP address to "Allow" or "Deny" access is delimited by ",(Comma)". With regard to the setting of
"Deny" access, "*(Asterisk)" can be described as a wild-card. (ex: 192.168.1.*,192.168.2.1,192.168.2.254)
*10: If HTTP is set to "Enable", HTTPS is changed to "Enable" automatically. You are not allowed to set "Enable" to
HTTP only.
*11: Port number can be specified only when the relevant port is set to "Enable". The port number must be unique.
Enable or disable IPv6.
Specify the mode to assign IPv6 address (Static or Dynamic).
Display link local address.
*6
Display IPv6 address when Dynamic is specified for assignment
mode.
*6 *7
Specify IPv6 address when Static is specified for assignment mode.
*6
Specify the prefix length when Static is specified for assignment
mode.
*6
Specify the gateway address when Static is specified for
assignment mode.
*6
Select the Access Limitation Type.
Allow All
: Access to BMC is not limited.
Allow Address
: Specify the IP Address that is allowed to access BMC.
Deny Address
: Specify the IP Address that denies accessing BMC.
Specify the IP Address to allow or deny to access with BMC.
Enable or disable HTTP service.
Specify the HTTP port number.
Enable or disable HTTPS service.
Specify the HTTPS port number.
Enable or disable SSH service.
Specify the SSH port number.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Description
*10
*11
*10
*11
*11
2. BMC Configuration
Default Value
Disable
Dynamic
*6
－
::
0::0
64
0:00
Allow All
*8 *9
Blank
Enable
80
Enable
443
Enable
22
191