NEC Express5800 Series Maintenance Manual page 149

Chapter 2 Configuring and Upgrading the System
Procedure B at the remote site
After the first startup of the server after change of the LUN allocation, log in to the ft server remotely,
and execute the following command.
# /opt/ft/sbin/ft-prep
If the screen appears to prompt you to input similarly to the procedure A, input [Y] twice, and restart
the server.
The description of the required work is completed here.
If the message to prompt you to input does not appear, there is no required work anymore.
(3)
N8803-041 SAS Board

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8803-041 SAS board and start the system.
After starting the system, the driver will be installed automatically.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
149