Replacing A Button - Huawei FusionModule2000 V500R002C03 Maintenance Manual

FusionModule2000 Smart Modular Data Cente
Maintenance Guide
Figure 6-20 Removing the access control device
Step 2 Remove cables from the old access control device and connect the cables to the new one.
Step 3 Install the new access control device on the baseplate and secure the device using screws at
the bottom.
Step 4 On the ECC800 WebUI, choose Monitoring > System > ECC800 > Controls > Delete
device with communication failure, and click Submit.
Step 5 Log in to the ECC800 WebUI, choose System Settings > Access Right Management, and
perform the Synchronize Permission operation.
Step 6 Verify that the access control system is normal.
----End

6.4.3.3 Replacing a Button

Context



Impact on the System
The faulty button cannot be used.
Preparations


Issue 03 (2019-12-04)
The light button and door open button (green) can reset automatically. Both BOM
numbers are 16050101.
The emergency button (red) needs to be manually reset. Its BOM number is 16050102.
The door open button, emergency button, and light button are replaced in the same way.
Tool: socket wrench
Material: door open button, emergency button, or light button
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
57