Replacing A Wifi Converter - Huawei FusionModule2000 V500R002C03 Maintenance Manual

FusionModule2000 Smart Modular Data Cente
Maintenance Guide

6.4.6 Replacing a WiFi Converter

Impact on the System
The app cannot be connected.
Preparations


Procedure
Step 1 Label each cable based on the corresponding ports on the WiFi converter.
Step 2 Remove the cables and antenna from the WiFi converter.
Step 3 Remove the failure WiFi converter from the guide rails.
Figure 6-39 Removing the WiFi converter
Step 4 Install the reserved WiFi converter in the original position and connect the cables.
Step 5 Log in to the ECC800 WebUI, choose Monitoring > System > WiFi Converter > WiFi
Management, enable the WiFi function, and set the WiFi SSID and password according to
the customer plan.
Step 6 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 7 Log in to the ECC800 WebUI, and edit the plan view by adding new devices.
Step 8 Check that the app can be connected properly.
----End
Issue 03 (2019-12-04)
Tools: ESD wrist strap, ESD gloves, step ladder, labels, marker
Material: WiFi converter
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
71