Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Cente
Maintenance Guide
Step 2 Replace the LED light.
1.
2.
3.
----End
Issue 03 (2019-12-04)
If an LED light does not work but the cables to the light are intact, the LED has failed and needs to
be replaced.
If all LED lights after a light do not work, the LED light adjacent to the working LED light has
failed.
Remove LED lights in the aisle one by one from the side not connected to the power
supply until the failed LED light is removed.
Replace the failed LED light with a new one, and reinstall the removed LED lights one
by one.
Figure 6-61 Replacing an LED light tube
Replace all failed LED light tubes until all LED light tubes in the aisle work properly.
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
88
Advertisement
Table of Contents
