TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
10.2 Setting the Display Language
After powering on the SMU, select English by pressing
press
10.3 Setting the Date and Time
Set the date and time as required.
Table 10-1 Setting the date and time
Main Menu
Setting Wizard
10.4 Setting Battery Parameters
Set the Battery1 Connected, Battery2 Connected, Rated Capacity and Installation Time
as required.
Issue 01 (2014-03-12)
to enter the standby screen.
If you select an undesired language, remove and then insert the SMU. Select a language again after the
SMU restarts.
The LCD screen becomes dark if no button is pressed within 30 seconds.
You need to log in again if no button is pressed within 1 minute.
The preset password is 000001.
Second-Level
Menu
Date and Time
NOTE
The date and
time vary
according to
time zones. Set
the time zone,
date, and time
based on the
local situation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
or
Third-Level
Default Value
Menu
Date and Time
-
Time Zone
UTC +08:00
Beijing
NTP Enable
No
10 Commissioning
on the LCD, and then
Setting Value
Set to the local
date and time.
Set to the local
time zone.
Yes/No
NOTE
Set the
parameter to
Yes if you need
to synchronize
the SMU time
and the site
network server
time.
73