Installing A Communications Cable Between The Power Cabinet And The Battery Cabinet - Huawei TP48200A-HT19C4-1 Installation Manual

TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
----End
7.2.5 Installing a Communications Cable Between the Power
Cabinet and the Battery Cabinet
Procedure
Step 1 Lay out the communications cable between the power cabinet and the battery cabinet. Route
the communications cable into the power cabinet through a cable hole at the right bottom and
into the battery cabinet through a package entry module at the left bottom.
Step 2 Connect one end of the communications cable to the COM.IN port on the battery cabinet
TCUA.
Step 3 Connect the other end of the communications cable to the COM.OUT port on the power
cabinet TCUA, as shown in
Issue 01 (2014-03-12)
Figure 7-7.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Cables
55