Table of Contents
Advertisement
TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
10.7.3 Setting Parameters Before Using the SNMP Management
Prerequisites
Before setting SNMP parameters, obtain the information listed in
Table 10-9 Information obtained from the NMS
Information
SNMP version
SNMP Port Number
Read Community Name
Write Community Name
User Name
MD5 Password
DES Password
Trap Target Address
Trap Port
Procedure
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway on the LCD, as shown in
Table 10-10 IP parameters
Second-
Level
Main Menu
Menu
Setting
Network
Wizard
Parameters
Issue 01 (2014-03-12)
Description
SNMP version and port number used by the SMU and NMS. The SNMP
versions include SNMPv1, SNMPv2c, and SNMPv3.
If you use SNMPv1 or SNMPv2c, enter the read community name and write
community name that comply with the NMS. Otherwise, the SMU will not
connect to the NMS.
To enhance the security, you need a user name and password for
authentication if you use SNMPv3. After the authentication succeeds, the
SMU can communicate with the NMS.
IP address and port number reported in the alarm trap.
Third-Level
Menu
Default Value
IP Address
192.168.0.10
Subnet Mask
255.255.255.0
Default Gateway
192.168.0.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Commissioning
Table 10-9
from the NMS.
Table
10-10.
Setting
Set this parameter according to
the IP address assigned by the
network administrator.
Set this parameter according to
the subnet mask provided by the
network administrator.
Set this parameter according to
the gateway address provided by
the network administrator.
78
Advertisement
Table of Contents
