TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
4.1 Unpacking and Acceptance
Procedure
Step 1 Check whether packing cases are intact. If a packing case is severely damaged or wet, identify
the cause and report to the local Huawei office.
The marking-off template is located on the interior of the cover of the cabinet packing case.
After you unpack the cabinet, put away the cabinet packing case cover.
Step 2 Unpack the case.
Step 3 Check the quantity of components against the packing lists attached to the packing cases. If
the quantity differs from that specified on the packing lists, identify the cause and report to the
local Huawei office.
----End
4.2 Removing the Cabinet from the Pallet
Procedure
Step 1 Loosen the bolts that secure the cabinet base to the pallet.
Step 2 Remove the cabinet from the pallet.
Issue 01 (2014-03-12)
4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Installing Cabinets
4 Installing Cabinets
31