Optional) Installing A Water Sensor - Huawei TP48200A-HT19C4-1 Installation Manual

TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
----End

6.3 (Optional) Installing a Water Sensor

Procedure
Step 1 Put the water sensor into the right bottom of the cabinet and secure it with a cable tie, as
shown in
Figure 6-4 Installing a water sensor
Step 2 Connect the signal cable for the water sensor to the WATER port on the UIM panel, as shown
in Figure
Issue 01 (2014-03-12)
Figure 6-4.
When you install a water sensor, ensure that the sensor hangs vertically and is 5–10 mm away from the
cabinet bottom.
6-5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
46