5
Remove the door handle (with rods) and the Fujitsu logo from the door.
Push the standard screwdriver horizontally against each of the upper and lower rod
supporters to remove them.
The upper rod may fall on you. Work carefully.
Remove the upper and lower M5 screws securing the door handle.
Remove the door handle together with the rods from the door.
Remove the M4 screw to remove the Fujitsu logo. Place your hand on the Fujitsu logo while
removing the M4 screw, to prevent the Fujitsu logo from falling.
'
Rod
Standard
Rod supporter
(two locations:
screwdriver
upper and lower)
M5 screw
Rod
Door handle
M4 screw
Door
Door handle
4 Handling the Rack after Installation
Fujitsu
logo
E
101