Main Features - Fujitsu 1740 User Manual

1.2

Main Features

■ Devices that can be mounted on this rack
This rack can accommodate the following types of Fujitsu products: (*1)
・ PC servers: "PRIMERGY"
・ UNIX servers: "SPARC Enterprise," "PRIMEPOWER," and "S series"
・ Storage systems: "ETERNUS"
・ Mission Critical IA Servers: (MC IA Servers) "PRIMEQUEST 510A" (*2)
・ Network products: (SR-S series, etc.)
*1) For more information, consult your Fujitsu sales representative.
*2) Note that the PRIMEQUEST 520A, 520, and 420 models of MC IA servers cannot be
mounted in this 19-inch rack. The PRIMEQUEST 520A, 520, and 420 models can be
mounted in the following racks.
・ MC-R7RC11/MC-R7RC21
・ MC-R7RC12/MC-R7RC22
・ MC-R8RC11/MC-R8RC21
・ MC-R8RC12/MC-R8RC22
■ Stabilizer requirement depends on the rack installation method followed
Whether you will need to use stabilizers on your 19-inch rack will depend on the rack installation
method that you follow.
■ Devices mounted in the rack center
Although devices are mounted toward the right side on conventional standard and global racks (when
viewed from the front), on the 19-inch rack, they are mounted in the center. This ensures that cables
do not become concentrated on one side of the rack, and it makes wiring easier.
■ Cable holders provided as standard equipment
Cable holders are provided as standard equipment on the cable routes in the rack, so that cables can
be managed more easily.
■ Improved cooling performance
The front and rear doors of this 19-inch rack provide an opening ratio of 80 % for improved cooling
performance. (The opening ratio of conventional standard racks and global racks is 60%.)
■ Flexible placement of the door's rotation axis
The position of the door's rotation axis can be changed at the rack installation site.
E
73
1 Overview