Fujitsu 1740 User Manual page 117

Align the heights of all attached M6 cage nuts.
4.3.2 Attaching rear brackets and temporarily mounting the
table
1
Using the rear M6 cage nuts that were attached in step 2 according to
Section 4.3.1, "Inserting cage nuts," temporarily fix the rear brackets R and
L to the rack post.
Use M6 screws to fix the brackets in position.
・In step 2, you will mount the table on rear brackets L and R. Temporarily fix the
rear brackets in position to the extent that the table will not drop down when it is
placed on the rear brackets.
・Carefully follow the installation directions for rear brackets L and R.
4 Handling the Rack after Installation
E
117