Fujitsu 1740 User Manual page 120

2
Secure the table in position by applying M6 bolts to the first and third screw
holes from the rear of rear brackets L and R.
M6 screws
B
A
C
120
Table
M6 bolts
Rear bracket R
A
Rack post
Rear bracket R
Screw holes of rear bracket R
used to secure the table in position
Table
* The same screw hole positions
on rear bracket L
First screw hole Third screw hole
from rear from rear
Section G-G
Secure the table in position while fully pressing rear brackets L and R against the
rack posts (in the direction of arrow A).
Secure the table in position while fully pressing rear brackets L and R against the
table so that no gaps appear (in the directions of arrows B and C).
If you are unable to press against rear brackets L and R adequately, do so after
slightly loosening the M6 screws marked with an asterisk (*).
Table
B
G
Rear bracket R
C
A
C
G
B
Rack post
Rear bracket L