Fujitsu 1740 User Manual page 85

3.4.2 Installing a rack supplied with no stabilizers
Secure the rack to the floor using the leveling feet or the Quake Proof Stabilizer kit.
■ Securing the rack using the leveling feet
Bolt the leveling feet to the floor through the M20 holes of 17 mm deep in the ground plate of the
leveling feet.
■ Securing the rack using the Quake Proof Stabilizer kit
The procedure for attaching the Quake Proof Stabilizer kit is shown below.
1
Attach the kit stabilizers to the front/rear and right/left sides of the rack.
The Quake Proof Stabilizer kit is an optional product.
2
Attach the stabilizers to the rack using three bolts for the front and right/left
sides and two bolts for the rear.
3
Anchor the kit stabilizers to the floor.
1. Anchor the stabilizers on the front/rear sides to the floor, each with two bolts.
2. Anchor the kit stabilizers on the right/left sides to the floor, each with three bolts.
Securing the stabilizer
with two bolts (front/rear)
Securing the stabilizer
with three bolts (sides)
3 Rack Configuration and Installation
E
85