Fujitsu 1740 User Manual page 89

3
Attach the shield rubber on the connection side.
Peel off the backing paper from the shield rubber, and attach it to the frame on the connection
side in order from the top of the rack.
Attach the shield rubber to the front and rear frames of the rack.
'
4
Align the height of the expansion rack with that of the existing rack.
Line up the side of the expansion rack with the side of the existing rack, and then adjust the
expansion rack feet to align the expansion rack height with that of the existing rack.
Frame
Shield rubber
3 Rack Configuration and Installation
E
89