Pdku2 Hardware Options; Pdku2 Installation - Toshiba Strara CTX Series Installation And Maintenance Manual

PDKU2 – Digital Telephone Interface Unit
Circuits per PCB:
Interfaces with:
Older Version(s):

PDKU2 Hardware Options

PDKU2 does not have to be configured for any option. Refer to
instructions on how to connect digital telephones, DADMs, and DDSS consoles to the PDKU2. Refer
to Chapter 8 – Peripheral Installation
Notes
BPCI, RPCI-DI and PDIU-DI are not supported on Strata CTX.
With the DKT3000/3500-series telephones, limitations are 16 (not 24) character LCD display,
Spdial
and LCD
There are no controls or indicators on the PDKU

PDKU2 Installation

1. Insert the PDKU2 (component side facing right) into the appropriate slot, and apply firm, even
pressure to ensure proper mating of connectors.
2. After installing the PDKU, gently pull the PCB outward. If the connectors are properly mated, a
slight resistance is felt.
50-Pin Female Amphenol Connector
Figure 4-7 PDKU2 PCB
Strata CTX I&M September 2002
eight digital telephone circuits
digital telephones (with or w/o ADM) (See Notes under Hardware Options)DDSS
console (circuit 8 only)
DKT2001 single line digital telephones
None
for instructions on connecting Door Phones (DDCBs).
Feature
buttons don't work and the BPCI cannot be used
Chapter 7 – Station Apparatus
(Figure 4-7).
5807
PCB Installation
for
Backplane Connector
4-11