Step 10: Install Other Pcbs Into The Cabinet(S) - Toshiba Strara CTX Series Installation And Maintenance Manual

10. Loosen the screw slightly, then slide the processor lock upwards. Tighten the screw so that the
PCB is locked into place.

Step 10: Install Other PCBs into the Cabinet(s)

1. Each PCB must be configured for the applicable hardware options prior to installation of the PCB
to the CTX100 cabinets.
Configuration instructions for individual PCBs are in
– MDF PCB Wiring. Configuration instructions for external hardware options are provided in
Chapter 8 – Peripheral
2. Use the PCB placement guide in
Page 1-21 to determine which PCB slot can be used for each PCB type.
Strata CTX I&M September 2002
Installation.
"Strata CTX100 Cabinet Slot Configuration Considerations" on
Strata CTX100 Installation
6004
Chapter 4 – PCB Installation and Chapter 6
2-19