Chapter 1 - Strata Ctx Configuration; Strata Ctx100 Overview - Toshiba Strara CTX Series Installation And Maintenance Manual

Strata CTX Configuration
This chapter contains information and worksheets to help configure the Strata CTX100 and CTX670
hardware components. A system overview of both the Strata CTX100 and Strata CTX670 hardware
components and the maximum station and line capacities available with the system processor is
provided.
Worksheets follow this information to aid in determining the actual cabinets and interface PCBs
needed for particular proposals and how these PCBs should be placed in Strata CTX cabinet slots.
Note The Strata CTX100 and CTX670 system capacities depend on the licenses stored on the
system processor, as well as the hardware mentioned above.

Strata CTX100 Overview

The Strata CTX100 system is a compact system
that provides large system features
It is designed for wall mounting and occupies very
little space.
The CTX100 basic processor can be configured
with a one or two cabinet system. A single (Base)
cabinet system supports a combination of up to 64
Exchange lines and stations, while a two (Base and
Expansion) cabinet system can support up to 112
Exchange lines and stations.
System line and station capacity is expanded by
adding Exchange line and station Printed Circuit
Boards (PCBs) into its universal slot architecture.
The CTX100 easily connects to outside public and
private telephone lines. All of the telephones
(stations) tied to the system can have direct access
to each other, as well as to the public and private
network.
Strata CTX I&M September 2002
(see Figure 1-1).
Figure 1-1
Base Expansion
CTX100 Base/Expansion Cabinets
1
5976
1-1