NEC iPasolink 200 Manual page 107

CABLE TERMINATION
(2) Tighten the connection to the torque value of 10 N·m.
(3) Confirm the total length* of the connector.
Notes
Tools
Installation
Submission Prohibited
NEC Internal Use Only
10 N·m
12mm
* total length :31.4 ~ 31.7 mm
1 When inserting, do not put the chip which is braided wire inside the
central conductor and the connector body.
2 Do not turn connector body, turn clamp nut attachment.
• spanner (16 mm)
• torque spanner (12 mm)
Clamp nut
16mm
* 31.4 ~ 31.7 mm
6-19
NWD-107460-02E