10-38 Ghz Hybrid/Coupler - NEC iPasolink 200 Manual

ODU MOUNTING
[A] 10-38 GHz Hybrid/Coupler
1 Fix the bracket and handle to the Hybrid/Coupler,
Note
2 Check the polarization and install the Hybrid/Coupler to the antenna by
tightening the M6 screws (four locations).
.
ANT
Notes
Installation
Submission Prohibited
NEC Internal Use Only
PUSH
M5 Head cap screw
Tightening torque is 3.0 N·m ±10%.
Guide pin
1. Be careful not to damage the O-ring.
2. Tightening torque is 4.0 N·m ± 10%.
M5x12(10ea)
Bracket
Flat washer
O-ring
O-ring
5-19
Handle
Hybrid/Coupler
M6 Screw
Short Plate
ODU Port
Hybrid/Coupler
NWD-107460-02E