Lifting Only The Rear - Husqvarna HUV 4214 2009 Maintenance And Service Manual

GENERAL INFORMATION
1026
Figure 3-3 Front Jack Stand Placement

LIFTING ONLY THE REAR

1. Place vehicle on a level surface.
2. Turn the key switch OFF and remove the key. Place the Forward/Reverse handle in NEUTRAL and set the park
brake. Chock the front wheels.
3. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline Vehicles on page 1-4.
4. If removing wheel, loosen the rear wheel lug nuts.
5. Lift rear of vehicle and support on jack stands (Figure 3-4, Page 3-5). See WARNING "Lift only one end..." in
General Warning on page 1-2.
6. Remove the wheel.
1024
Figure 3-4 Rear Jack Stand Placement
2009-2010 HUV 4214, HUV 4414, and HUV 4414X Maintenance and Service Manual
3
Lifting The Vehicle
Page 3-5