Under Seat Closeout Panel Installation - Husqvarna HUV 4214 2009 Maintenance And Service Manual

BODY AND TRIM
975
Figure 4-26 Closeout Panel Removal – rotate to remove
8. Remove outer closeout panels from vehicle.

UNDER SEAT CLOSEOUT PANEL INSTALLATION

1. Install under seat closeout panels in the reverse order of removal. Tighten bolts to 22 in-lb (2.5 N·m).
2. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles on page 1-4.
2009-2010 HUV 4214, HUV 4414, and HUV 4414X Maintenance and Service Manual
Under Seat Closeout Panels
4
Page 4-15