Siemens SINAMICS S120 Equipment Manual page 19

● North American market
SINAMICS S devices with one of the test symbols displayed fulfill the requirements
stipulated for the North American market as a component of drive applications.
You can find the relevant certificates on the Internet pages of the certifiers
(http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html).
● Specification for semiconductor process equipment voltage drop immunity
SINAMICS S devices meet the requirements of standard SEMI F47-0706.
● Australia and New Zealand (RCM formerly C-Tick)
SINAMICS S devices showing the test symbols fulfill the EMC requirements for Australia
and New Zealand.
● Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
Standards that are not relevant
China Compulsory Certification
SINAMICS S devices do not fall in the area of validity of the China Compulsory Certification
(CCC).
EMC limit values for South Korea
The mandatory EMC limits for Korea correspond to the limits of EN 61800-3 (EMC product
standard for adjustable speed electrical drive systems) for category C2 or to limit class A,
Group 1 according to EN 55011.
Compliance with the limits according to category C2 or class A, group 1 is achieved with
suitable additional measures. Further, additional measures may be required, such as using
an additional radio interference suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
and in the "SINAMICS Low Voltage Engineering Manual".
The final statement regarding compliance with the standard is always specified by the
respective label attached to the individual unit.
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
1.5 Directives, standards, certificates
Introduction
17