Cabinet Design And Emc; Information; General; Safety Information - Siemens SINAMICS S120 Equipment Manual

Cabinet design and EMC

10.1

Information

10.1.1

General

The modular concept of SINAMICS S120 chassis units allows a wide range of potential
device combinations. For this reason, it is impossible to describe each individual
combination. This section instead aims to provide some basic information and general rules
on the basis of which special device combinations can be configured to ensure
electromagnetic compatibility and adequate cooling – therefore ensuring reliable operation
with the appropriate functionality.
SINAMICS S120 components are designed for installation in the appropriate enclosures,
which can take the form of cabinet units or control boxes made of steel that provide
protection against shock and other environmental effects. They are also part of the EMC
concept.
10.1.2

Safety information

Not observing fundamental safety instructions and residual risks
Not observing fundamental safety instructions and residual risks listed in Chapter 1 can
result in accidents with severe injuries or death.
• Comply with the fundamental safety instructions.
• When assessing the risk, take into account remaining risks.
Injuring caused by foreign objects in the device
Parts and components falling into the device (e.g. drilling chips, end sleeves, etc.) can
cause short-circuits and damage to the insulation. This can lead to serious injuries (arcing,
bangs, pieces flying out of the equipment).
• Only perform installation and other work when the devices are current-free.
• Cover the ventilation slits during the installation of the cabinet and remove the cover
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
WARNING
WARNING
before switching on.
10
409