Siemens SINAMICS S120 Equipment Manual page 40

System overview
3.3 Technical specifications
Environmental class / harmful chemical substances
Storage
• 2)
Transport
• 2)
Operation
•
Environmental class /mechanically active substances
Storage
• 2)
Transport
• 2)
Operation
•
Organic/biological influences
Storage
•
2)
Transport
• 2)
Operation
•
Degree of pollution
The Safety Integrated safety function:
The components must be protected against conductive contamination (e.g. by installing them in a cabinet with degree of
protection IP54B according to EN 60529).
Provided that conducted interference can be prevented at the installation site, the degree of protection for the cabinet can
be decreased accordingly.
Installation altitude
Certificates
Conformity
Standards
Approvals (only up to 3 AC 600 V)
Depending on the system configuration, higher output frequencies are possible.
1)
In transport packaging
2)
Note on the installation of a UL-approved system
Note
Installation of a UL-approved system
For a UL-approved system use 60/75° C copper conductors only.
38
Class 1C2 acc. to EN 60721-3-1
•
Class 2C2 acc. to EN 60721-3-2
•
Class 3C2 acc. to EN 60721-3-3
•
Class 1S1 according to EN 60721-3-1
•
Class 2S1 according to EN 60721-3-2
•
Class 3S1 according to EN 60721-3-3
•
Class 1B1 acc. to EN 60721-3-1
•
Class 2B1 acc. to EN 60721-3-2
•
Class 3B1 acc. to EN 60721-3-3
•
2 according to EN 61800-5-1
The devices may be operated only in environments with degree of pollution 2
and without condensation. On control cabinets with forced air cooling, foreign
particles must be filtered out of the inflow air through filter mats.
To prevent condensation, the devices can be warmed constantly by heaters.
> 2000 m above sea level without derating
•
> 2000 ... 4000 m above sea level, see derating characteristics
•
- EMC directive No. 2014/30/EU
- Low-voltage directive No. 2014/35/EU
- RoHS 2 directive No. 2011/65/EU
- Machinery directive No. 2006/42/EC for functional safety
EN 61800-5-1, EN 60204-1, EN 61800-3, EN 60146-1-1
cULus (File Nos.: E192450, E214113 and E253831)
being prepared: All Motor Modules Chassis-2
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9