Siemens SINAMICS S120 Equipment Manual page 312

Motor Modules Chassis-2
7.6 Electrical connection
Attaching the PE connections
The shield connections are used to connect the shields of the shielded signal cables to the
Motor Module.
Attach the support plate for the shield connections at the intended position. You can break
off individual parts from the 6-part support plate corresponding to your specific requirements,
torque 3 Nm.
Figure 7-10
310
Attaching the PE connections
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9