Manual Configuration - Panasonic IMAGECHECKER PV230 Manual

Introduction
Thank you for purchasing Panasonic Industrial Devices SUNX's IMAGECHECKER PV230.
Please read this Instruction Manual carefully and thoroughly for the correct, optimum and safe use of this
product.
All our products are strictly inspected before shipped. However, before using this product, check for problems
that occurred during transport and then perform operation check. If the product is found to be damaged or does
not operate as specified, we are sorry to trouble you, but please contact the shop where you purchased the
product or our nearest local office to you.

Manual Configuration

The following manuals have been prepared for this product. Go through these manuals according to the
objectives and use them fully. Keep the manuals at hand after reading over so that you can see them
whenever necessary.

IMAGECHECKER PV230 Manual Operation Edition (
Describes items necessary for operating the PV230. If you need the booklet, please contact our
personnel in charge of sales.
• OCR Checker
• Code Reader Checker
• Communication Commands
• Preset menu
For the hardware information and the functions other than OCR Checker and Code Reader Checker, please
refer to the PV200 Manual.

IMAGECHECKER PV200 Manual Operation Edition
Describes items necessary for operating the PV200. Use this manual for preprocessing functions and
procedure for setting inspection conditions of various checkers. If you need the booklet, please contact
our personnel in charge of sales.
• Procedure for setting inspection conditions with various checkers used
(except for Optical Character Reader (OCR) checker and code reader checker)
• Operation and procedure for setting RUN Menu
• Environment Setting
• Tool Setting (Configuration change)
• Debugging of main unit (Inspection re-examination function)
• Select Menu
• Communication Settings
• Tool software for PC
• Specification and Part No. List
This description)
i