Table of Contents
Advertisement
Setting Character size per Recognized character
No.
Specify the maximum and minimum values of area, width and height per recognized character number.
1.
Select "per Judge. Char." in "Judgement
Character Size".
"Character Size: Set" becomes selectable.
However, when "Judgement Character" are all
"_" marks, the character size cannot be
specified.
2.
Select "Character Size: Set".
SETUP menu for Character size is displayed
on the screen.
<TRIG>: Executing a test displays the
recognized characters and the sizes in the
rightmost area of the list.
3.
Input "Area Offset", "Width Offset" and "Height Offset"
checking each size of recognized characters.
Set necessary items only. The items entered with "0" for the
maximum and minimum values both by executing "Set All" without
inputting offset values represent not to execute Judgement
character size.
4.
Execute "Set All: Set".
The value "Recognition value + Offset" is input as the maximum
value, and the value "Recognition value - Offset" is input as the
minimum value.
5.
For adjusting the values collectively specified, select the list,
and select the items (each max. and min. values) of the
recognized character No. which needs adjustment to change
the values.
47
- Quick Links:
- Manual Configuration
Hide quick links:
Advertisement
Table of Contents
