Setting Items Relating To Inspection Area - Panasonic IMAGECHECKER PV230 Manual

3.2 Setting Items relating to Inspection Area

Items set in "Area Setting" menu are described below.
In Code Reader checker, the inspection area size cannot be adjusted using Area Size Adjustment and a
Mask Area cannot be set.
Selecting a Camera
Select a camera image to set Code Reader checker.
1.
Select a camera No. in "Camera".
The image of the selected camera is displayed.
Select "Switch Disp." shown by pressing the F1 key to change the displayed image type (Live/Memory
and Gray/Binary) or size.
Selecting Usage of Color Image in Inspection
Set this when using a color camera.
Select "Converted Gray Img." or "Extracted Color Img.".
Refer to Chapter 4.6 in the PV200 User's Manual for the details of setting procedure.
Selecting Position Adjustment
Position Adjustment is helpful when position or angle of an inspection object printed with code is unstable.
Select a Position Adjustment checker that has been already set. Refer to Chapter 4.8 in the PV200 User's
Manual for details of position adjustment.
1.
Select "Position Adjustment".
The list of position adjustment is displayed.
If a position adjustment checker is not created, "Position Adj." cannot be selected.
2.
Select a Position Adjustment No. from the list.
63