Setting Judgement Condition - Panasonic IMAGECHECKER PV230 Manual

3.4 Setting Judgement Condition

General Information on Judgement Condition
With Code Reader checker, passing status can be judged by comparing the decoded codes with the specified
string. Set the criteria and conditions for passing status in Judgement Condition menu.
The judgement result can be output to "Judgement", "Nuerical Calculation" and "Data R/W".
Setting Jdugement Condition
1.
Select "Yes" in "String Judgement".
3.
Select "Judgement Characters".
The window to enter the judgement characters is
displayed.
Selecting the "CLR" deletes all the character strings.
4.
Input the characters to be compared with read
characters.
It is also possible to specify a character type with particular symbols as well as characters and specify
not to execute the comparison.
No character specification: "_" (Default)
Not judged. For example, when specifying "123_", only the 4th character is not judged.
When specifying "_ _ _ _", all the four characters are not judged. So, the judgement is OK as read
characters are equal to judged characters. However, in this case, the "_" marks more than the
number of read characters should be set. When the specified "_" characters are less than the number
of read characters, the judgement is NG.
Number specification: "#"
Judgement is OK when read characters are numbers.
Alphabet specification: " ! " / " ; " / " , "
" ! ": Judgement is OK when read characters are alphabets (uppercase or lowercase).
" ; ": Judgement is OK when read characters are uppercase alphabets.
" , ": Judgement is OK when read characters are lowercase alphabets.
<Setting example>
To judge the character string (five numbers and five lowercase alphabets) as OK, specify "#####,,,,,"
for the judgement characters.
Decoded codes
Judgement characters
Judgement = NG
83