Setting Items Relating To Inspection Area - Panasonic IMAGECHECKER PV230 Manual

2.2 Setting Items relating to Inspection Area

Items set in "Area Setting" menu are described below.
For Character Recognition, the inspection area size cannot be adjusted using Area Size Adjustment and a
Mask Area cannot be set.
Specifying Checker No.
1.
Select "Character Recognition" in "Checker Type".
2.
Select the checker No. list and specify a checker
number to set.
3.
Press the ENTER key to determine the checker No.
"Character Recognition" window is displayed.
About the No. of settable Character recognition checkers
The maximum number of character recognition checkers available for a type is 100. The settable number does
not change even when the number of blocks has been added.
For example, when the number of blocks has been set to "2", available character recognition checkers are 100.
As there is no restriction on the character recognition checker No. to be created, character recognition checkers
can be created in any numbers between No.0 and No.199 when the number of blocks is 2.
Selecting a Camera
Select a camera image to set a character recognition checker.
1.
Select a camera No. in "Camera".
The image of the selected camera is displayed.
Select "Switch Disp." shown by pressing the F1 key to change the displayed image type (Live/Memory and
Gray/Binary) or size.
Selecting Usage of Color Image in Inspection
Set this when using a color camera.
Select "Converted Gray Img." or "Extracted Color Img.".
Refer to Chapter 4.6 in the PV200 User's Manual for the details of setting procedure.
Selecting Position Adjustment
Position Adjustment is helpful when position or angle of an inspection object printed with characters is unstable.
Select a Position Adjustment checker that has been already set. Refer to Chapter 4.8 in the PV200 User's
Manual for details of position adjustment.
1.
Select "Position Adjustment".
The list of position adjustment is displayed.
If a position adjustment checker is not created, "Position Adj." cannot be selected.
2.
Select a Position Adjustment No. from the list.
15