Table of Contents
Advertisement
4.4 Basic Operation Using the Keypad
4.4.1 Selecting an Option from the Menu
Follow the instructions below to select an option from the displayed menu or modify the setting value.
1.
Move the cursor to the option you want to select by tilting the ENTER key on the keypad
upward/downward/left/right.
2.
Press the ENTER key.
The highlighted option at the step 1 is selected.
This series of operation for selecting a menu option or a setting value is described as "select/choose/highlight (an
option or a setting value)" in this manual.
4.4.2 Setting (Inputting) Values
When you set (input) values, follow the instructions below.
1.
Tilt the ENTER key on the keypad upward/downward to modify the value.
If the ENTER key is tilted left/right, the digit position of the value that you have entered can be changed.
2.
Press the ENTER key to determine the modified value.
The value that you specified at the step 1 is fixed.
4.4.3 Setting the Inspection Area
The ways of setting the position or size of the area for executing inspection are described below. There are
several shapes of areas including rectangle, circle and polygon, line and area.
Drawing a Rectangle and Plane Scan
Follow the steps below after displaying a checker shape on the screen by selecting "Change".
1.
Move the whole rectangle.
Move the rectangle by tilting the ENTER key in the desired
direction and press the ENTER key to fix the position.
2.
Fix the start point (the white square mark on the rectangle).
Move and position the start point by tilting the ENTER key in the
desired direction. Press the C key to go back to the previous step.
49
Advertisement
Table of Contents
