Table of Contents
Advertisement
2.2.3 Mounting the PV310
There are the two ways to mount the PV310, by using screws or by hooking on the DIN rail. Refer to the
dimensions in the back of this manual to fix with screws.
Mounting the PV310 on the DIN rail
The PV310 can be mounted on or removed from a 35 mm wide DIN rail (DIN EN50022) with a single easy
operation.
To mount the PV310 on the DIN rail:
1.
Hook the PV310 onto the DIN rail.
2.
Press the lower part of the PV310 to fix it into
position.
To remove the PV310 from the DIN rail:
1.
Insert the slot-head driver into the mounting
lever.
2.
Press the mounting lever downward.
3.
Lift and detach the PV310.
Mounting the PV310 to the VGA Monitor
To mount the PV310 on the VGA monitor, use the fixing bracket, ANMX835.
18
Advertisement
Table of Contents
