Panasonic MICRO-IMAGECHECKER PV310 Use Manual page 339

Camera Switching Unit: ANPV3700
Item
Function Camera switch
Camera image division
Separation position (Up/Low)
Separation position (Left/Right)
Camera input
Camera output
External switching signal input
Settings of dip switches
Display
Rated voltage range
Consumption current
Operating temperature range
Storage temperature range
Operating/storage humidity range
Insulation resistance (initial)
Voltage resistance (initial)
Vibration resistance
Jolt resistance
Weight
Specification
2 camera inputs - 1 camera output (switching by external or
manual signal input)
2 camera input - 1 camera output (UP/Low),
2 camera input - 1 camera output (Left/Right)
240 (+/- 2) lines
240 (+/- 2) pixels
2 inputs (A and B)
1 output (OUT)
1 input, 5 to 24V DC, Bi-directional photo coupler
LOCAL/REMOTE, NORMAL/DIV, A/B, UP/LOW and
LEFT/RIGHT
Camera switching display, Green LED (A, B)
12 V DC (supplied from the PV310 controller)
Max. 200 mA
0°C to 50°C (without icing and dew condensation)
-20°C to +60°C (without icing and dew condensation)
35% RH to 75 % RH (without icing and dew condensation at
25°C)
100MΩ or more between input part and camera case or DIN rail
(with a 500V DC Megger)
500V AC between input part and camera case or DIN rail for one
minute
10 Hz to 55 Hz, one sweep per minute, amplitude 0.75 mm, 30
minutes each in X/Y/Z direction
2
196m/ s , 5 times each in X, Y and Z directions
Approx. 150g (only the main body)
331