List Of Commands - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

11.2.5 List of Commands

PV310 provides the following commands:
Type of Command
Commands for inspection start
Commands for reading or
changing the setting data
stored in the PV310
Other
• About the commands for changing each setting value
The PV310 will lose the images if the power is removed before you save them.
- Smart Matching, Contour Matching - Re-registering templates
- Slice Level: Changing upper/lower limits
- Gray Edge: Changing edge threshold
- Num. Calcu.: Changing the max./min. values
262
Command
To execute inspection
To transmit product type and configuration data in a
Compact Flash memory card to the PV310
Smart Matching, Contour Matching - Re-registering
a template
Slice Level - Reading Min./ Max
Slice Level - Changing Min. / Max.
Gray Edge - Reading threshold of edge
Gray Edge - Changing threshold of edge
Num. Calcu. - Reading Min. /Max.
Num. Calcu. - Changing Min. /Max.
Data Save - Storing the current settings in the PV310
Switching to another product type
Resetting Statistics Data
Changing Display Image
Emulating the Keypad
Reference
page
%S 263
%F 264
%A 265
%L 267
%T 268
%H 270
%G 272
%C 276
%N 278
%M 280
%X 280
%Q 280
%I 281
%K 282