Table of Contents
Advertisement
8.2 Drawing an Image on the Monitor Screen: Marker Function
The Marker function displays straight lines, rectangles, and circles in pink or blue within the image display area
during inspection (in RUN mode). This function will helpful for positioning an object. Up to eight markers per product
type can be specified.
8.2.1 Creating a New Marker
1.
Highlight "TOOL" > "Marker" from the menu bar.
The window for marker setting is displayed.
2.
Choose a marker number (1 to 8).
The cursor moves to the cell in the Camera column.
3.
Choose a memory for setting a marker.
4.
Highlight "Shape".
5.
Highlight "Change Shape".
The procedure for setting an area is the same for Inspection Area and Mask
Area.
6.
Highlight "Color".
Select "Pink" or "Blue" from the menu.
7.
Press the C key.
When the cursor moves to the marker number, the marker settings are
completed.
If you set to display the marker in RUN mode, the marker that you
have set will be displayed in this mode.
201
Advertisement
Table of Contents
