Table of Contents
Advertisement
8.4 Group Move
The Group Move function can move the checkers of the same position adjustment number at a time. In other words,
you can move all of the checkers that are referring to the same adjustment amount.
Setting Procedure:
1.
Select "TOOL" > "Group Move" from the menu bar.
2.
Move the cursor on the value next to "Position Adj."
and press the ENTER key.
Specify the position adjustment number to which the
checkers to be moved at a time are referring.
3.
Select checkers you want to move from the checkers of the specified position adjustment No.
Option
Action
Yes
Checkers are moved.
Checkers are not moved at a time regardless of
No
the same position adjustment number
4.
Select "Move".
All of the checkers to be moved are displayed.
5.
Move the checkers to the desired positions, and then
press the ENTER key.
When the dialog message appears, choose "YES" to
continue.
The checkers that can be moved in a group are the checkers that are set to the image of the same camera used
for Position/Rotate Adjustment checkers. As the following table shows, when the camera setting is different, the
checkers cannot be moved simultaneously even in the same group of Position Adjustment.
Setting
Checker
1. Position Adjustment (Binary Edge)
2. Gray Edge
3. Gray Edge
204
Position Adj. group
Camera
0
1
1
1
1
2
Group Move
---
Possible
Impossible
Advertisement
Table of Contents
