Panasonic MICRO-IMAGECHECKER PV310 Use Manual page 285

Command format: Fixed Length
Communication direction
Sending command from
external device
Response: Normal
Response: Error 2
ERROR signal is output to the
parallel output port
• To specify the command format (Comma separated/Fixed Length), select "ENVIRONMENT" > "Serial
Communication" > "Command" from the menu bar.
• Even if "Fixed Length" is selected, the PV310 can read more than 5-digit data.
Command / Description
% C ? ? CR
?? : 01 to 96 (Specify the numeric calculation number in 2-digit form.)
% C ? ? Min. Max. CR
?? 01 to 96
Min. Fixed (12 Digits)
bbbb Fixed (12 Digits)
- 02147483648 to 002147483647: Unused digits are filled with '0'.
- 02147483648 to 002147483647: Unused digits are filled with 'Blanks'.
% Z CR
Cause:
Numeric calculation No. specified by the sending command does not exist.
Specify the numeric calculation number in 2-digit
form.
- 02147483648 to 002147483647
or
- 02147483648 to 002147483647
277