Table of Contents
Advertisement
Item
Parallel
Min. Ready
Commu
OFF Time (ms)
nication
Parallel Reset
Condition
FCT1 Signal
FCT2 Signal
Templat
Re-register
e
Position
Settings
Area Display
Initialize Environment
Option
(Initial value:
Function
With an
underline)
0 to 1000 ms (in
To specify minimum Ready-off time. This function is
1 ms unit)
effective if the external device cannot detect the Ready
signal change from Off to On due to fast processing speed
and short product switching time.
Hold /
Choose parallel output signal for resetting (OFF) timing
Off After Read /
from the options listed below:
Off Before Read
•
Hold: Retains up until the next inspection result is
output (initial value)
•
Off After Read: Once resets parallel output signal after
capturing the next image
•
Off Before Read: Once resets parallel output signal
before capturing the next image.
Display Camera
Sets the operation of the PV310 when FCT1 signal is
Image /
turned on. Initial value: Display Camera Image
Template
Sets the operation of the PV310 when FCT2 signal is
Setting /CF
turned on. Initial value: Template Setting
Restore
Setting Position
To set the position of the re-register areas.
/ Adjusted
Position
No/Yes
To switch re-register area display On/Off. For Area Display,
re-register start signal must be input twice
---
To return the configuration data to default settings (except
for language settings)
Ref.
page
－
248
252
to
256
232
240
221
Advertisement
Table of Contents
