Table of Contents
Advertisement
4.1 About Screen Monitor
No.
Description
A
Status display area:
Mainly displays the status of the PV310
(1)
The currently selected product type No. and title and execution mode
(2)
Image type that is currently displayed
(3)
Message area:
Displays messages, subwindows for checker setting, and results of the checker test
(4)
Total judgment result:
Displays "OK" in green if the judgment formula that is set to " Total Judgment" returns true by selecting
"TOOL" > "Calcu.-Stat.-Output" and then opening Judgment tab. (Refer to page 185 about registration of
total judgement.)
(5)
Output status of signals:
If the signals shown below are output signals, the squares located under each signal are displayed in green
(or in red for ERROR) only in RUN mode).
R: Ready signal / E: Error signal / O: Overflow signal / S: STROB signal / 1-8: D1-D8 signals
(6)
Inspection time (unit: ms): OFF time of READY signal after START signal input
B
Menu bar:
Displays the menu to set the inspection conditions and inspection environment.
C
In RUN mode
In SETUP mode
46
Images, checker shapes, inspection results, etc. are displayed according to the
settings in SETUP mode.
Images, inspection areas, etc. are displayed. Every setting window that is selected
from the menu bar is also displayed in this area.
Advertisement
Table of Contents
