About Code Reader - Panasonic IMAGECHECKER PV230 Manual

3.1 About Code Reader

What is Code Reader?
Code Reader is a function that recognizes the shapes of various bar codes and 2D codes and decodes
(restores) them to characters or symbols.
For QR code, Shift-JIS characters can be recognized, displayed and output.
Up to 80 characters (one-byte character) can be read for one area.
Two-byte code is not supported for display (only Shift-JIS can be displayed) and judgement condition. However,
it can be output to external devices.
Supported Codes
Bar codes (25 types)
Code 2 of 5, ITF
NW-7, CODE39,CODE93, CODE128
JAN/EAN-13, JAN/EAN-13 Add-On2, JAN/EAN-13 Add-On5
JAN/EAN-8, JAN/EAN-8 Add-On2, JAN/EAN-8 Add-On5
UPC-A, UPC-A Add-On2, UPC-A Add-On5
UPC-E, UPC-E Add-On2, UPC-E Add-On5
PharmaCode,
GS1 DataBar Omnidir., GS1 DataBar Truncated, GS1 DataBar Stacked
GS1 DataBar StackedOmnidir., GS1 DataBar Limited, GS1 DataBar Expanded
GS1 DataBar ExpandedStacked
Two-dimensional codes (2 types)
Data Matrix
QR code
Specifying Checker No.
1.
Select "Code Reader" in "Checker Type".
2.
Select the checker No. list and specify a checker
number to set.
3.
Press the ENTER key to determine the checker No.
"Code Reader" setting window is displayed.
About the number of settable Code Reader checkers
The maximum number of Code Reader checkers available for a type is 100. The settable number does not
change even when the number of blocks have been added.
For example, when the number of blocks has been set to "2", available Code Reader checkers are 100.
As there is no restriction on the Code Reader checker No. to be created, Code Reader checkers can be
created in any numbers between No.0 and No.19s9 when the number of blocks is 2.
60