Panasonic IMAGECHECKER PV230 Manual page 73

QR Code
1.
Select "QR Code" in "Code Type".
2.
Select "Code Model Parameter".
3.
Select "Standard", "Enhanced" or "Manual" in
"Code Model Parameter".
Select this when printing is in good condition.
Standard
The reading speed tends to be fast.
Select this when printing is not in good
Enhanced
condition. The reading speed tends to be
slow.
Set parameters manually.
Manual
By executing "Training", you can newly
register the detection result of the current
code or additionally register it to the current
setting values. For details of the auto
adjustment, refer to Chapter 3.3.3.
Standard
Parameter item
Mirrored
Contrast Min.
QR Model Type
Strict Model
Version Min.
Version Max.
Gap Size Min.
Gap Size Max.
Visible Pos.
Patterns Min.
Enhanced
Setting Setting
Setting range Default
value value
Auto Auto No / Yes / Auto
30 10 1 to 100
Auto Auto Auto / 1 / 2
Yes Yes Yes / No
1 1
40 40
No No No / Small
Small Small No / Small /
3 2
Manual
Description
Auto Specify whether to recognize a
mirrored code (matrix inversion) or
not.
10 Min. value of the contrast between
code and background
Auto The QR code models 1 and 2 are
supported.
Yes Specify whether to comply with
module conditions or not.
1 to 40 1 Specify the min. value of the
recognized version.
1 to 40 40 Specify the max. value of the
recognized version.
No Specify the min. value of a gap
between modules.
Small Specify the max. value of a gap
Big between modules.
2 / 3 2 It is set when the finder pattern is
partly incomplete. 3: Complete, 2:
Incomplete
71