About Windows; Language Selecting Window (Ver.1.10 Or Later) - Panasonic PV500 User Manual

3.1 About Windows

3.1.1 Language Selecting Window (Ver.1.10 or later)

When you start the very first time after delivery, the English dialog to select interface language appears. You
can display multiple languages in Ver.1.10 or later of PV500. Select an appropriate language in this dialog.
Since the language can be changed in SETUP menu later as well, select your most accessible language for
now.
Switching Language: see page 348.
1.
Turn on the power.
After the splash screen appears, the English dialog to select language is displayed.
2.
Press the Enter key.
Settable languages are displayed.
Japanese
English
German
French
Spanish
Italian
Simplified Chinese
Korean
Traditional Chinese
(for Ver.2.00)
3.
Tilt the ENTER key up/down to move the cursor onto
the language you want to use and press the ENTER
key.
4.
Tilt the ENTER key up/down to move the cursor onto
the lower message and press the ENTER key.
The message says "Do not show this window at the next
start-up."
Pressing the ENTER key checks the check box and the
window does not appear from the next startup.
The English dialog appears also at the next startup without checking it.
Even if the check box is not checked, the language selecting window will not be displayed after you change
the setting of "General" in SETUP menu including language.
5.
Tilt the ENTER key up/down to select "OK" and then press the ENTER key.
RUN menu is displayed on the screen.
If you make an operation not to display the language selecting window such as selecting "Do not show this
window at the next start-up.", you cannot display it again. In this case, make setting from "TOOL" >
"General" > "Language" in SETUP menu to switch language.
36